Goose Night Sleep Guarantee

Innerspring

When you think of innerspring mattresses, you might imagine yourself as a little kid jumping on a squeaky bed that obviously had some type of metal inside. This would be the standard innerspring mattress, and it’s made using a steel coil support system. While you may very well remember sleeping on this type of mattress, you have less likely seen what they look like on the inside. These products use springs that are connected into a single unit, and, as the number of coils increases, the higher the quality of sleep.

Although the standard innerspring can seem primitive to those who have since moved on to take advantage of newer mattress technologies, the fact remains that they are still the most popular. And there are many good reasons why this is the case. Aside from the fact that they are incredibly consumer-friendly when it comes to affordability, they also:

  • Have a variety of firmness options
  • Are widely available
  • Are easy to transport

However, it’s important to be aware that there are a few setbacks. You get what you pay for, and, while these types of mattresses are easy on the budget, they are known to lack quality when it comes to their ability to counteract pain and pressure points. You may also experience noise as the springs begin to wear, creating the classic squeaky bed when you roll over at night. Furthermore, standard innerspring mattresses are often more prone to wearing out quickly. Thus, while you save money on the initial purchase, you can easily lose in the long run when you have to go out and replace your mattress.

Pocketed Coil

If you’re not quite sure what a pocketed coil mattress is, the keyword is a coil. It’s synonymous with spring, which puts it in the same general family as the innerspring mattress. However, there are some qualities that set the pocketed coil mattresses apart that are good to be aware of while you shop.

For starters, these types of the mattress have a higher focus on minimizing motion transfer. Because of their general reputation for the bounciness, innerspring mattresses often disturb one sleeper when the other moves. However, pocketed coil mattresses are designed a little bit differently. Rather than being wired together with other coils, these are wrapped separately in fabric encasements.

An Investment Worth Making Over Innerspring If You Have a Sleeping Partner

Pocketed coil mattresses are the most expensive of innersprings, and they often make a great investment if you want to go beyond the standard innerspring mattress. While you may have to pay a higher price, they can provide you the additional rest you need that is often lost due to disturbances throughout the night.

Pocketed coil mattresses are the most expensive of innersprings, and they often make a great investment if you want to go beyond the standard innerspring mattress. While you may have to pay a higher price, they can provide you the additional rest you need that is often lost due to disturbances throughout the night.

Considering the Qualities

There are two sides to every coin, and there are high-quality innerspring mattresses on the market well worth taking a look at. Your ideal next mattress may be comprised of innerspring technology, and there are a few signs that this may be a good option if you:

  • Enjoy a bed that offers a high degree of bounce
  • Don’t enjoy beds that have that sinking in feeling
  • Appreciate the qualities that a bed with excellent edge support has to offer.

Memory Foam

Foam mattresses are highly popular, and there’s a good chance you’ve at least sampled some type of relaxation tool utilizing foam technology. Famous for its ability to envelope its user and make them feel snug, there are a number of industries taking advantage of this innovation including:Footwear,Automotive,Furniture

If you enjoy the feeling of sinking into your bed and being enveloped and cradled to sleep, then a memory foam mattress may be just what you’re in the market for. These products are known for their ease in contouring to the body and slow restoration to original form when pressure is released. Think of the material that, when pressed on with your hand and released, leaves an impression for a few seconds.

While you may have heard of memory foam or even tried it out for yourself, what you may not have known is that it’s origins lie with NASA. It was in the early 1960’s when scientists began working with a material known as viscoelastic. This soft and energy-absorbent substance serves to offer protection to pilots as it is incorporated in the manufacturing process of airplane seats.

Became Notable for Comfort

It may seem strange that something we’ve commonly grown to associate with mattresses was, indeed, created in response to space exploration. We should remember that memory foam was originally intended for safety measures.

Since memory foam is able to effectively distribute body weight in response to heat and pressure, it does provide the added degree of support necessary in the event of high impact collision. In an airplane crash, for example, this could minimize injuries or even death. However, it was quickly noted just how comfortable the end product was. Shortly after its initial introduction in the aerospace industry, it was also being used in the production of:

  • Safety helmets
  • Shoes
  • Prosthetics
  • Seating pads for the disabled

Memory foam mattresses and pillows took the world by storm, and it is now one of the most popular mattress materials on the market.

Benefits Beyond Comfort

When it comes to comfort, memory foam mattresses have a relatively high rate of customer satisfaction. However, that’s not the only reason you may want to consider the purchase of a memory foam product. Just a few of the features you should carefully consider include:

  • High level of pressure point relief
  • Encourages proper spine alignment
  • Can help not only in pain relief but also prevention.
  • Low motion transfer.
  • Reduced dust mites and other allergens
  • Can fit adjustable beds, which we’ll discuss in a moment, with ease

Durable, lasting as long as a decade.

SomniGel

No mattress offers the right features for everyone, and that’s because there are so many different preferences out there. While one person may be attracted to the sinking-in feeling of memory foam, others may prefer just the opposite, and a SomniGel mattress provides just what this type of consumer is looking for.

If you’re in the market for a mattress that can quickly bounce back to its original form when you release pressure, gel foam delivers. In fact, there has even been an impressive test performed in which an elephant steps on a SomniGel product, and it quickly springs back to normal once the massive foot is removed.

Seemingly Defying Physics

Anyone who has taken even high school physics has been exposed to the fact that every action has an equal and opposite reaction. However, this intriguing product type seems to defy physics. When you lay on these mattresses, they don’t push back like you’re probably accustomed to. This is because they feature contact surfaces as low as just 22 percent and an impressive 78 percent open air. Aside from the fact that it can feel as though you’re sleeping on air, you’ll likely also appreciate:

  • Impressive ability to disperse heat, thus allowing you to sleep cooler and more comfortably
  • Hollow columns within the mattress that allows for increased airflow to more easily control temperature and keep the bed fresh

Latex Mattresses

All latex beds are becoming increasingly popular. Aside from the fact that they are made using a natural resource, they are also affordable and feature the durability you need to make the most of your mattress investment.

As familiar as you feel you may be with latex, you probably weren’t aware that not all latex is made the same. There are two distinct manufacturing processes that are applied in the creation of all latex products that result in different qualities. Failure to at least be aware of the differences in these options can cause you to decide on a product that simply doesn’t deliver the level of quality you expect.

Dunlop

During the Dunlop process, a thick sap is whipped up after being extracted from trees. Once they are appropriately formed, the sap is baked into its final configuration.

Since memory foam is able to effectively distribute body weight in response to heat and pressure, it does provide the added degree of support necessary in the event of high impact collision. In an airplane crash, for example, this could minimize injuries or even death. However, it was quickly noted just how comfortable the end product was. Shortly after its initial introduction in the aerospace industry, it was also being used in the production of:

Two Steps Further With Talalay

Talalay latex involves two extra steps which ultimately lead to the development of columns with which air can more easily flow. Think increased breathability. By removing air with a vacuum and then instantly freezing the latex before baking, consumers are able to enjoy an increased ability to sleep cooler.

The Good and the Bad

Aside from the fact that they can help you reduce your carbon footprint, they also offer a number of unique qualities:

  • Don’t use chemicals
  • Don’t require flipping and rotation
  • Feature minimal off-gassing

However, if you do make this investment, you can expect a few negative aspects. For starters, they are typically more expensive than innerspring mattresses. However, if you are willing to invest a little more for a quality product, this is often money well spent. Latex mattresses can be heavier and more difficult to move.

Innerspring Latex Hybrid Mattress

It’s pretty clear to see that there’s much that can be done with latex, and just another option on the market is the innerspring latex hybrid mattress. As the name clearly implies, this product combines the features of innerspring mattresses with latex, and one of the most notable results to take advantage of is the fact that you can often enjoy the relaxing latex properties at a lower price when innersprings are also incorporated.You will also enjoy:

  • Antimicrobial features typical of latex
  • Springs can provide additional support
  • The end product is typically durable when compared to equally-priced competitors on the market

As with any type of hybrid, however, there is always the possibility of structural weaknesses due to the combination of different properties. In order to decide if this is going to be an issue for you, it’s often a good idea to look for a product that offers an initial trial period or at least go to a store to try out the different innerspring latex hybrids available to see if there are any evident issues you should be aware of.

Polyfoam Latex Hybrid

While a large percentage of the population would agree they find themselves indulging in a variety of sleeping positions during the course of any given night, the fact remains that there are also those who have a particular sleeping position they prefer for long periods of time. If this describes you and you favor side sleeping, a polyfoam latex hybrid could prove to be just the product you’ve been looking for.

Do Your Homework and Know What to Look For

Just as with any big decision you make in life, the choice to invest in polyfoam latex hybrid models requires you to do some homework in order to know what you’re looking for. This is because there are so many compromises on the quality that can be easy for clever marketers to downplay when you are ignorant of them.

One of the most important to consider is whether the latex portion of your hybrid is made using the Dunlop or Talalay process. While they share a number of the same qualities, the fact remains that two additional steps in the Talalay process allow for a higher degree of breathability, thus allowing sleepers the ability to maintain lower body temperature throughout the night. Just a few other things you should be on the lookout for as you shop include:

  • Use of durable and non-toxic materials
  • Use of materials with a good Certi-Pur® rating (you can learn more about what these ratings mean on the consumer page for Certi-Pur®)
  • The softness or firmness level of the product (higher softness is ideal for stomach sleepers while you may opt for something firmer if you prefer to sleep on your side or back)

Hybrid options allow you to take some of the most attractive qualities of your favorite mattress types and combine them into an ideal product. While it often can require a higher degree of research on your part, it can prove to be well worth it when the end result is the discovery of a hybrid mattress that specifically caters to your preferences.

Innerspring Memory Foam Hybrids

Hybrid products are all the rave. From hybrid cars to plants and more, there’s a good possibility that you’ve already purchased material utilizing this type of technology. But, do you really know what this means? In order to know if a hybrid mattress would best allow you to sleep on a schedule even with a busy life, it’s necessary to consider just what it means to be a hybrid.

What’s a Hybrid?

A hybrid really does sound scientific, but there really isn’t that much to it. Basically, hybrid means the combination of two materials or technologies to make something new. For example, for cars, features of the combustion and electric engines are converged. As close as the produce section of your grocery stores lie forms of hybrids. Blackberries and raspberries, for instance, combine to produce boysenberries.

getting yourself into. When you combine innersprings and foam, there are a number of benefits that result. Just some of these include:

  • Precise support where you need it most
  • Supplemental support as foam and springs both provide support in different ways
  • Potential cost savings over all memory foam mattresses

The Pillow-top Mattress

It’s probably becoming quite clear that there are more mattress types on the market than you ever even considered, and another viable option you have on the table is the pillow-top mattress. Commonly used with innerspring or even air mattresses, pillow-top technology allows for an increased level of comfort by adding several more inches of padding on the top layer of the mattress. Commonly referred to as Euro top mattresses, these products offer the buyer a number of options as just some of the material you can choose from includes: cotton, Fiberfilm,Foam,Memory foam,latex, wool

In order to help you easily weigh the pros and cons of the pillow-top mattress, it helps to see them laid out, and I will do that for you as follows:

prop

  • Has cooling properties
  • Comfortable fiberfill layer
  • Keeps its shape
  • Quick bounce back
  • Washable

Cons

  • Pricey
  • Slight odor
  • May be too soft for some

It’s clear to see that, while there are several intriguing factors that could make a pillow-top mattress an attractive choice, there are also negative aspects that could prove to send you back to the drawing board. However, if you have a desire to make a minimal investment now and are prepared for a quick replacement, this could be a great transitional product which could provide you the boost in sleep quality you need to stay happy and healthy.

All Polyfoam

If you already have a pretty good idea that the foam mattress will provide the best qualities for you, your choice is only partially made. You now must decide what type of foam you’d like to invest in, and a popular choice is polyfoam.

Derived from petroleum, this option combines the use of a polyol and an isocyanate mixed with water. The end result? A flexible foam that has proven by far to be the most popular amongst foam mattress consumers. Even more interesting is the fact that this is one of the least expensive materials modern bed-in-a-box manufacturers use.

When you hear some of the components of polyfoam mattresses such as Methylene Diphenyl Diisocyanate, it can be easy to fear for your safety. After all, some of these chemicals can be hazardous to your health. However, you’ll be pleased to know that, when implemented for the use of mattresses, special processes take place to ensure these components are non-toxic.

Consider the Density

You may want to read: Best Mattress Guide

If you’re in the market for a polyfoam mattress, the most important aspect to keep in mind as you shop is density. The higher the density level, the more durable you can expect the product to be. It’s well worth noting that mattress manufacturers are not required to provide their density levels, and, if they are sub-par, this is an aspect most will likely avoid discussing when they can.

Just a few other components that are critical to your health that you may find compelling about polyfoam include:

  • High level of relief from aches and pains after a long day
  • Helps encourage proper posture and spine alignment
  • Through the use of inorganic fibers, sleepers can enjoy a degree of relief from allergies

Can encourage proper head elevation to reduce the symptoms of disorders such as sleep apnea.

Adjustable Beds

With so many products on the market and the fact that you hopefully won’t have to make the investment again for several years, you may be a little hesitant to make your final purchasing decision. If this is the case for you, you may want to consider adjustable beds. This option allows you do just what the name implies. You have the control to make necessary adjustments to allow for the changes you may need in order to accommodate your every need.

Just a few situations in which this ability can prove beneficial include:

  • You need to move your bed accordingly in order to comfortably work on your laptop to turn in your term paper on time.
  • You or your partner suffer from sinus pressure, excessive snoring, or back pain.
  • You want to prop your legs up to enjoy a snack with your favorite sitcom on television.
  • You’ve had a long day and want to take advantage of the massage option that some products feature. With the flip of a switch, you can be enjoying your own spa-like experience in your bedroom.

Adjustable beds are also versatile in the fact that they can be used not only with box springs but also with adjustable bases in order to offer you even more customization. You really can have your cake and eat it too when you opt for these products as they can typically be used with any headboard or footboard. However, there are a few potential downsides that you should be aware of before you make up your mind, and just a few of these include:

  • Expect to make a sizable investment as these products can easily cost you in excess of $2,500.
  • Because they typically include components such as motors, joints, and more, you can expect maintenance costs, too, to be higher.
  • They can be loud.
  • If you expect you’ll need to move the bed frequently, be ready for a heavier product.
  • Due to their unique sizes, it can prove more difficult to find the right sheets.
  • Can prove difficult to keep clean, and you often have to invest in custom tools to maintain hygienic quality.

Hybrid

The spruce / lindsay boyers best for: Firm support combined with comfort. Hybrid mattresses combine the support of an innerspring mattress with the softness of foam. Most hybrids have a layer of some type of coils topped with one to three layers of memory, latex, or gel foam. Many companies offer custom-made hybrids to suit the customer's sleeping needs.

prop

  • More bounce, resilience than solid foam mattresses
  • Good body temperature regulation

Cons

  • Heavy, difficult to move
  • More expensive than other types

Pillowtop

Rawf8 / getty images best for: durability combined with comfort.Pillowtop or Euro-top mattresses are constructed with a layer of padding on the top of a standard mattress, usually stitched in place as a self-contained additional layer. The padding can be made of foam, wool, or cotton. The pillowtop layer adds comfort and durability to the mattress. Usually more expensive than a standard mattress, a pillowtop mattress cannot be flipped.

Pillowtop or Euro-top mattresses are constructed with a layer of padding on the top of a standard mattress, usually stitched in place as a self-contained additional layer. The padding can be made of foam, wool, or cotton. The pillowtop layer adds comfort and durability to the mattress. Usually more expensive than a standard mattress, a pillowtop mattress cannot be flipped.

prop

  • Extremely comfortable
  • Can be included on either inner spring or foam mattresses
  • Most expensive type of mattress

Cons

  • Mattress cannot be flipped
  • Potential for sagging

What is MOTION ISOLATION?

If you’ve ever struggled to sleep next to someone because you could feel every time they rolled over, you know how important motion isolation can be. On a mattress with excellent motion isolation, you’re unlikely to wake up when your partner climbs into bed, but a mattress with poor motion isolation may leave you wide awake due to your partner’s tossing and turning.

Understanding motion isolation is a crucial part of , particularly for those who share their bed with another person or a pet. Some materials and mattress types, such as memory foam mattresses, tend to isolate motion exceptionally well. Others, like innerspring mattresses, may not be the right choice for sensitive sleepers.

We put the mattresses we review through a rigorous testing process, including four tests that help us evaluate their motion isolation performance. Through a combination of subjective and objective test results, we’re able to accurately judge a mattress’ performance and compare different mattresses to each other.

We’ll provide more details about our testing process and discuss how to predict a mattress’ motion isolation abilities according to its materials and construction.

What is Motion Isolation?

Motion isolation describes whether or not movement on one part of the mattress is felt elsewhere on the mattress. A common example is to set a glass of water on the mattress — if it remains upright and unspilled when somebody climbs into bed, the mattress likely has good motion isolation. If it spills, the opposite is likely true.

When sleeping in a bed with strong motion isolation, you likely won’t feel much when your sleep partner rolls over or changes position. If the mattress also has good support around the edges, you may not even notice when they get in or out of bed. That said, no mattress has perfect motion isolation, and you may still sense some movement if you are sleeping very close to your partner.

Who Should Care About Motion Isolation?

Motion isolation is most important to people who share their bed with a partner, children, or pets, especially if they are easily woken by movement.

People move more when sleeping with someone else, with men moving more often than women. Although most people report sleeping better with their partner than they do alone, objective measures of sleep quality are usually lower for co-sleepers, partially due to their partner moving and shifting while asleep. With this in mind, a motion-isolating mattress may be helpful even for people who don’t believe their partner disrupts them.

Motion isolation is significantly less important for people who sleep alone. There are trade-offs with motion isolation that may also deter people who sleep with a partner. Mattresses that emphasize motion isolation can be less bouncy and more difficult to move on, which can be inconvenient for combination sleepers or people with mobility concerns. The ability to absorb movement can also make a mattress less suitable for sex.

Mattress Materials and Motion Isolation

Some mattress materials are inherently better at isolating motion than others. While support core design is one of the most important factors when considering motion isolation, the use of motion- isolating materials in the transitional and comfort layers can improve the mattress’ overall performance and help alleviate the effect of a motion-transferring core.

Material Description Feel Motion Isolation Performance
Memory Foam Memory foam is a type of synthetic foam that contours closely in response to heat and pressure. It adapts to your body as you sleep, then regains its original shape once you’re out of bed. Most people feel as though they are sleeping in, rather than on, their memory foam mattress. The material is adept at reducing pressure points, but memory foam mattresses tend to sleep quite warm. Memory foam mattresses are among the best for motion isolation. The material absorbs movement,and its close contouring means that it compresses directly beneath your weight rather than causing the mattress surface to slope.
Polyfoam Polyfoam is similar to memory foam, but it is less dense and has more variation. It can contour closely to the body like memory foam, or it can be made firm enough to use as a support core. Polyfoam is one of the least expensive mattress materials. Most polyfoam mattresses offer moderate contouring and pressure relief, and they tend to be bouncier and more responsive than memory foam beds.Softer models may trap heat unless the manufacturer has added temperature regulation features. Polyfoam can perform better or worse on motion isolation depending on how it is made. Softer polyfoam layers may absorb motion almost to the same extent as memory foam, whereas firmer, more resilient polyfoam may transfer some movement.
Latex Latex is traditionally made from the serum found in rubber trees, making latex mattresses popular among sleepers interested in natural materials. Synthetic latex made from petrochemicals is also available. Latex can be manufactured using the Dunlop or the Talalay method, each with a slightly different feel. Latex mattresses are quite responsive and offer minimal contouring, giving the feeling of sleeping on, rather than in, the bed. Dunlop latex is firmer, while Talalay latex contours more closely but has a natural springiness. Latex absorbs little heat and tends to sleep cool. While the bounciness of a latex mattress makes it less able to absorb motion, latex mattresses still tend to perform reasonably well. The firmness and type of latex used can have a significant impact on the mattress’ performance.
Microcoils Microcoils tend to be used in a bed’s transitional or comfort layers. These smaller coils are around 1 to 3 inches tall usually individually wrapped in fabric, and made of flexible metal wires. Because microcoils are small and often individually wrapped, each coil compresses independently to help form a supportive cradle for the body. Most microcoils allow for plenty of contouring and pressure relief, while also sleeping cooler than foam layers due to the airflow through the coils. PLike all coils, microcoils are naturally bouncy. However, as they tend to be wrapped in fabric and smaller than regular innerspring coils, they offer closer contouring that doesn’t transfer as much movement.

Motion Isolation by Mattress Type

Mattress type plays a major role in motion isolation, as different support cores respond differently to weight and activity. While each mattress is unique, certain types tend to display significantly better performance in this category than others.

All-Foam Mattresses

All-foam mattresses generally pair a high-density polyfoam support core with one or more polyfoam, memory foam, or latex comfort layers. Of all the mattress types, all-foam mattresses tend to offer the best motion isolation. Although the dense foam core withstands compression, it tends to absorb movement instead of transferring it to the surrounding areas. The caveat is that foam mattresses often have poor edge support, which can cause the mattress surface to dip somewhat when getting out of bed.

Latex Mattresses

Mattresses made entirely from latex typically use softer latex in the comfort layers and firm, dense latex in the core for support and durability. Latex mattresses offer moderate levels of motion isolation. While the softer comfort section is usually able to minimize surface-level movement, the bed’s overall bounciness can cause some transfer when sleepers roll over or change positions. Latex cores do tend to have better edge support than polyfoam cores, which can help reduce the disruption when someone gets out of bed.

Hybrid Mattresses

Hybrid mattresses combine a coil support core with a thick comfort system that is usually made from polyfoam, memory foam, microcoils, or latex. While hybrid mattresses can use any type of coil, most use pocketed coils that are individually encased in fabric. Because pocketed coils compress individually, they perform much better at motion isolation than traditional interconnected coils. The foam or latex comfort layers can further mitigate motion transfer.

Innerspring Mattresses

Most innerspring mattresses feature an interconnected coil design, creating a supportive and bouncy feel. Connected coils move as a unit under pressure, making innerspring mattresses among the worst for motion isolation. Because these mattresses have little to no comfort layers, even small movements can cause a ripple effect throughout the other coils, leading to motion transfer deep in the mattress. The connected coils also cause the mattress surface to tilt if one sleeper is heavier than the other, which can amplify motion transfer.